DIVIDO Line
Polyester, Polyamide, Polyolefin, Polyethylene, Biomaterials, and Bi-Component polymers can all be processed with the DIVIDO Line. It is possible to make a large number of filament cross sections. The equipment is set up in accordance with the filament specifications. Versions with High Tension are available.
So what can we offer you?
Machines, completely build and tested at our location.
Plug and play concept, only connection of utilities needed before start-up.
Vast sets of processing parameters already programmed for all processes and polymers.
Industrial rugged components designed for 24/24, 7/7 application.
Easy shipment due to fit into standard container sizes with no need of dismanteling.
Economical and flexible system by applying only the units needed:
-
With or without the DIVIDO Premo (extrusion-spinning) unit.
-
Possibility of adding extra units later on.
DIVIDO Premo
Extrusion-Spinning Base unit
Stand-alone unit for Extrusion-Spinning. Power Supply 400VAC 3Ph 32A. Air-pressure 7 bar 0.3m³/min. Chilled water supply (8-12°C) 15lt./min.
Extruder |
25 mm |
Output PP |
5.5kg/hr |
Output PET |
7.5/hr |
Spinning Pump |
3cc/rev |
Polymers |
PP, PET, PA6, PBT, PTT, PLA, PE |

DIVIDO Take-up units

Divido POY.
Stand-alone unit for POY production.
Power supply 230VAC 1Ph 20A
Air-pressure 6 Bar 0.3³/min.
Denier range |
50-500 |
Denier per Filament |
1-7 |
Speed |
850-3200 |
Filaments |
16-180 |
Divido POY-FDY
Stand-alone unit for POY-FDY production.
Power supply 400VAC 3Ph 20A.
Air-pressure 7 Bar 1.0³/min.
Power supply 400VAC 3Ph 20A.
Air-pressure 7 Bar 1.0³/min.
Denier range |
50-1100 |
Denier per Filament |
1-7 |
Speed |
850-3200 |
Filaments |
16-180 |


Divido BCF
Stand-alone unit for BCF production.
Power supply 400VAC 3Ph 25A.
Air-pressure 7 Bar 2.1³/min.
Denier range |
650-3000 |
Denier per Filament |
7-25 |
Speed |
200-1100 |
Filaments |
40-180 |
Divido HT
Stand-alone unit for HT production.
Power supply 400VAC 3Ph 25A.
Air-pressure 7 Bar 1.2³/min.
Power supply 400VAC 3Ph 25A.
Air-pressure 7 Bar 1.2³/min.
Denier range |
100-1100 |
Denier per Filament |
1-10 |
Speed |
300-3200 |
Filaments |
Low-High Speed |
